Monday, January 14, 2019

2019 01/13

Partially installed the Matco Parking Brake valve.   (Ordered some AN-3 nipples) to complete the install.

Also need to order a cable for the brake lock.

Measured the outer cable shield distance from the throttle quadrant to the butterfly at 86-89".  Travel to fully open/close is 2" or 2.5" depending which hole is used in the butterfly.

Ordered AN-4 1/8" fittings for the fuel vent line termination into the firewall manifold.

Futzed with wiring for awhile.   Would be nice to use a 90 degree back shell for some of the Dynon DB 9 connectors to reduce the depth clearance.

Started prepping the copilot thigh support ribs to be glassed in since the fuel lines and selector are plumbed.

No comments:

Post a Comment